RAK14000 E-Ink Display Module Datasheet
Overview
Description
The RAK14000 WisBlock E-Ink Display Module is designed to be part of a production-ready IoT solution in a modular way and must be combined with a WisBlock Core and a WisBlock Base module.
The RAK14000 module provides an interface to connect an E-Ink Display, which is known to be an extremely power-efficient display. The E-Ink Display is an Active Matrix Electrophoretic Display (AM EPD) module with 2.13 inches active area (212 × 104 pixels for White Black Version and 250 x 122 pixels for the White-Black-Red Version). It also allows you to connect a Three-Button Module, which can be used on a different application. All of this can be controlled through a WisBlock Core.
There are two versions of RAK14000 module for sale in the RAKwireless Store, the white-black display panel and white-black-red display panel version.
Features
-
Input Voltage: 3.3 V
-
Display Size: 2.13 inches
-
Wide Viewing Angles
-
Pure Reflective Mode. Very viewable displays!
-
On-chip display RAM and oscillator
-
Extremely Low Power Consumption! Perfect for power-conscious applications.
-
Comes with a 3-Button Module. Application can be customized.
-
Uses FPC (Flexible PCB) for its Display and Button modules
-
Chipset: Solomon Systech Limited SSD1680
-
White-Black
- Display Resolution: 212 x 104 pixels
-
White-Black-Red
- Display Resolution: 250 x 122 pixels
Specifications
Overview
Mounting
The RAK14000 E-Ink Display Module is mounted to the IO Slot of a WisBlock Base Board. Figure 1 shows the mounting mechanism of the RAK14000 on a WisBlock Base, such as the RAK5005-O.
Figure 1: RAK14000 Module MountingHardware
The hardware specification covers the pinouts of the board and its functionalities and diagrams. It also presents the parameters and their standard values.
Chipset
| Vendor | Part number |
|---|---|
| Solomon Systech Limited | SSD1680 |
Pin Definition
The RAK14000 WisBlock E-Ink Display Module comprises a standard 40-pin WisConnector. The 40-pin WisConnector allows the RAK14000 module to be mounted on a WisBlock Base board, such as RAK5005-O. The pin order of the connector and the pinout definition is shown in Figure 2.
Figure 1: RAK14000 Module Pinout| Pin Number | Pin Name | Description | Pin Number | Pin Name | Description |
|---|---|---|---|---|---|
| 2 | NC | Not Connected | 1 | NC | Not Connected |
| 4 | GND | Ground | 3 | GND | Ground |
| 6 | 3v3 | 3.3V | 5 | NC | Not Connected |
| 8 | NC | Not Connected | 7 | NC | Not Connected |
| 10 | NC | Not Connected | 9 | NC | Not Connected |
| 12 | NC | Not Connected | 11 | NC | Not Connected |
| 14 | NC | Not Connected | 13 | EINK_RESET | EPD Reset signal. Active Low. |
| 16 | NC | Not Connected | 15 | NC | Not Connected |
| 18 | NC | Not Connected | 17 | NC | Not Connected |
| 20 | NC | Not Connected | 19 | NC | Not Connected |
| 22 | NC | Not Connected | 21 | NC | Not Connected |
| 24 | NC | Not Connected | 23 | NC | Not Connected |
| 26 | EINK_CSK | Serial Clock | 25 | EINK_CS | Chip select. Active Low. |
| 28 | EINK_SDIN | Serial Data | 27 | EINK_SDIN | Serial Data |
| 30 | NC | Not Connected | 29 | D/C# | Data /Command control |
| 32 | EINK_BUSY | Busy state | 31 | S1 | Button Signal 1 |
| 34 | NC | Not Connected | 33 | NC | Not Connected |
| 36 | NC | Not Connected | 35 | NC | Not Connected |
| 38 | S3 | Button Signal 3 | 37 | S2 | Button Signal 2 |
| 40 | GND | Ground | 39 | GND | Ground |
SPI_CS, SPI_MISO, SPI_MOSI, SPI_CLK, IO1, IO3-IO7 are connected to 40-pin WisConnector.
Electrical Characteristics
DC Characteristics
The following specifications apply for: VSS = 0V, VCI = 3.0 V, TOPR = 25 ºC
| Symbol | Description | Min. | Nom. | Max. | Unit |
|---|---|---|---|---|---|
| VCI | Logic supply voltage | 2.2 | 3.0 | 3.7 | V |
| VDD | Core logic voltage | 1.7 | 1.8 | 1.9 | V |
| Islp | Sleep mode current | - | 20 | - | µA |
| Idslp | Deep sleep mode current | - | 1 | 5 | µA |
| Iopr | Typical operating current | - | 4.3 | 4.5 | mA |
Mechanical Characteristics
Figure 3 shows the dimensions and mechanical drawing of the RAK14000 module.
Figure 1: RAK14000 Module Mechanical CharacteristicsSchematic Diagram
Figure 4 shows the schematic diagram of 40-pin WisConnector:
Figure 1: RAK14000 40-pin WisConnector Connection SchematicFigure 5 shows the E-Ink Display Connector Schematic:
Figure 1: RAK14000 E-Ink Display Connection SchematicFigure 6 shows the E-Ink Display Driver Schematic:
Figure 1: RAK14000 E-Ink Display Driver SchematicFigure 7 shows the Three-Button Module Schematic, connected through FPC (Flexible PCB) cable:
Figure 1: RAK14000 Three-Button Module Schematic
